GRAPHTEC CE5000-40CRP - 6. DISASSEMBLY AND REASSEMBLY; 6.1 Exterior Parts

CE5000-UM-251-9370 6-1
6. DISASSEMBLY AND REASSEMBLY
6. DISASSEMBLY AND REASSEMBLY
6.1 Exterior Parts
6.1.1 How to Replace the Right Side Cover
How to detach the right side cover
(1) Remove the three M4L6 binding head screws from the right side cover.
Note: Hold the right side cover after you have detached the screws; there is a flexible cable inside the cover.
(2) Disconnect the flexible cable which is connected to the control panel relay board.
Center cover
M3L6 TP head screw
M4L6 binding
head screw
Right side cover
Left side cover
M4L6 binding
head screw
How to reinstall the right side cover
(1) Connect the flexible cable to the control panel relay board, and mount the right side cover.
(2) Fasten the three M4L6 binding head screws.
6.1.2 How to Replace the Left Side Cover
How to detach the left side cover
(1) Remove the three M4L6 binding head screws from the left side cover.
How to reinstall the left side cover
(1) Fasten the three M4L6 binding head screws.