CE5000-UM-251-9370 ii
HISTORY OF REVISIONS
No. Date issued Description of revision Page Edition
1 06.07.06 First Printing All 01
2 06.09.13 Information for the 9e60p was added. 10-1,10-12 02
3 06.09.13 Part list for the steel stand ST0068 was added. 10-9 02
4 06.09.13
Part number for the main board of the CE5000-40 was corrected.
4-1,10-1 02
5 06.09.26 Procedure of upgrading the system firmware was corrected. 7-13 03
6 06.09.26 Section numbers were corrected. 11-10 to 11-12 03
7 06.11.07 Procedure of adjusting the pen force was corrected. 7-4 04
8 06.11.16 Footer of page was wrong. 4-1 05
9 06.11.16 Cutting Mat 40 of part number was updated. 4-1,10-3 05
10 06.11.16 Cutting Mat 120 of part number was updated. 4-1,10-3 05
11 07.02.28 Part number for the cutter pen holder was corrected. 10-6 06
12 07.02.28 The cutter pen holder and the pen holder thumb screw L10
were deleted from recommended parts list.
4-1 06
13 07.05.18 CE5000-120AP information added. All 07
14 07.10.19
Remark of the Main Board of CE5000-120AP was corrected.
4-1 08
15 08.03.04 Discription for the roll stocker was corrected. 10-15 09
To Next Page
Loading...
