GRAPHTEC CE5000-40CRP - Page 66

CE5000-UM-251-9370 6-30
6. DISASSEMBLY AND REASSEMBLY
(6) Fit the Y-flexible cable into the Y-rail as shown below. The Y-flexible cable shouldn’t touch the left side
plate. Allow a 3-mm space between the left end of the Y-flexible cable and the left side plate.
Allow a 3-mm space between the left end
of the Y-flexible cable and the left side plate.
(7) Secure the Y-flexible cable onto the flexible cable guide of the Y-rail using double-sided adhesive tape.
(8) Reattach the other parts in the reverse order in which they were detached.