CS510/IS210-UM-251-9370 4-6
4. INSTALLING THE SOFTWARE
4.1.3 Installing the Driver Software for Windows Vista
The following procedure assumes that you are using the CS510-11eN as part of your system, and that
you are using the USB interface. The scanner name displayed in the windows is the name of the scanner
connected to the computer (CS510-11eN is used in this section).
(1) Connect the scanner to the computer, turn on the scanner first, and then turn on the computer. When
Windows starts up, insert the CD-ROM supplied with the scanner in the CD-ROM drive. Turn on the
power to the scanner.
(2) The following window appears.
Select the option “Locate and install driver software (recommended)”.
(3) The screen shown below is displayed when you click “Scanners and Cameras”.
Click [Continue] to continue the installation.
(4) The following window appears.
To Next Page
Loading...
