GRAPHTEC CS510 SERIES - 10. Adjustments Using Software; Starting and Setting Up Scanning Master 21+

CS510/IS210-UM-251-9370 10-1
10. ADJUSTMENTS USING THE SOFTWARE
10. ADJUSTMENTS USING THE SOFTWARE
10.1 Starting the Software
• Ensure that OPS112 (Scanning Master 21+ Ver 6.60 or later) is installed.
(1) Connect the scanner to the PC using a USB cable and switch on the scanner.
(2) Start Windows (OS).
(3) Start OPS112 (SCANNING MASTER 21+).
(4) Select "Model Setup" from the "Scan" menu.
(5) Select model that is connecting from the pull down menu.
(6) Click the "Confirm" button to confirm the scanner is connected.