CS510/IS210-UM-251-9370 4-11
4. INSTALLING THE SOFTWARE
4.2.3 Checking the Interface Connection for Windows Vista
The procedure outlined below assumes that the CS510-11eN is connected in your system.
The scanner name displayed in the windows is the name of the scanner connected to the computer (CS510-
11eN is used in this section).
(1) Launch the Control Panel using the Start menu.
(2) The screen shown below is displayed when you click on the "Hardware and Sound”.
(3) The screen shown below is displayed when you click on the “Scanners and Cameras” icon.
Ensure that “Graphtec CS510-11eN”is indicated here.
To Next Page
Loading...
