CS510/IS210-UM-251-9370 8-20
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.19 Ethernet Board
Detaching the ethernet board
(1) Detach the right and left side covers (see Sections 8.1 and 8.2).
(2) Detach the front guide assembly (see Section 8.4).
(3) Disconnect all the connectors on the ethernet board.
M3L6 binding head screw
Ethernet Board
(4) Remove the four M3L6 binding head screws holding the ethernet board and then detach the ethernet
board from the unit.
Reattaching the ethernet board
(1) Reattach the ethernet board in the reverse order in which it was detached.
To Next Page
Loading...
