CS510/IS210-UM-251-9370 8-16
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.16 Pinch Roller Covers
Detaching the rear pinch roller cover
(1) Remove the two M3L8 binding head screws and the bushes holding the rear pinch roller cover.
M3L8 binding head screw
(2) Remove the three M3L6 binding head screws holding the rear pinch roller cover from the rear of the
scanner.
M3L6 binding head screw
(3) Detach the rear pinch roller cover from the top cover assembly.
To Next Page
Loading...
