FC8600-UM-251-9370 8-10
8 TROUBLESHOOTING
Error
code
Error Display Cause Solution
E04013
It has exceeded detection area
while detecting the registration
mark.
Check the media. Check the print
position of the registration mark.
E04014
E04015
E04016
E04017
E04018 Media set lever was lowered. Reload the media and try again.
E04019
There was cancel operation by
the user.
Redo the process.
E04021
Registration mark was not
detected in the auto detection
area.
Check the media. Check the print
position of the registration mark.
E04022
There was cancel operation by
the user.
Redo the process.
E04023
Registration mark was not
detected.
Redo the sensor level adjustment.
Change the color of the registration
mark.
Check the media.
Check the print position of the
registration mark.
To Next Page
Loading...
