5-2
5.3 The Power is Turned On But the Plotter Doesn't Operate
Possible cause Solution
Is the AC adapter disconnected? Securely insert the AC adapter into the plotter's AC
inlet.
Does the supply voltage conform to supply the Be sure to use only the specified voltage.
specified value?
Is the electrical outlet being supplied with power? Check the power supply.
When the plotter is turned on, does the control If yes, a RAM error has occurred.
panel's PROMPT lamp blink during initialization? Contact your vendor.
HINT
The RAM status is only checked when the plotter is turned on.
To Next Page
Loading...
