h-2
Unpacking Your Plotter
After unpacking your plotter and before actual use, be sure to visually inspect the plotter and to confirm the
presence of all standard accessories.
■ Visual inspection
Carefully check the exterior of the plotter. If you detect a flaw or other defect, please contact the vendor where
you purchased this plotter.
■ Checking the standard accessories
Make sure that you have all the parts listed in the following table. If any part has been omitted, please contact
your vendor.
Exterior View Part Name Description Qty.
1 AC adapter SA45-3129 1
2 Cable AC cable 1
3 USB cable (1.5 m) CBL0106-1-5M 1
4
Water based KF550-S1
1 pack
fiber-tip pens (
2 of black, 1 each of red, blue, green
)
5 Plotting paper Coated paper (PL501) 5 sheets
6 Soft plastic cover For MP303-04 plotters 1
7
Paper alignment To mark positions on the writing
1 sheet
stickers panel for paper alignment (8 stickers)
To Next Page
Loading...
