GRAPHTEC MP303-04 - Raising and Lowering the Pen; Pen Up;Down Control

3-11
3.5 Raising and Lowering the Pen
Depending on the current status of the pen being held at the pen carriage, this function either lowers the pen if
it is raised or raises it if it is lowered.
■ Procedure
(1) With the plotter in Ready mode, press the
MODE
key.
Press the or key until the menu below appears.
To raise the pen (Pen Up), press the key.
To lower the pen (Pen Down), press the key.
Pen
Up Down
(2) Press the
MODE
key to return to Ready mode.
X=
Y=