3-42
Settings and Measurement
(10) Data replay menu
Data replay menus are displayed by pressing the MENU key during replay.
* For details on how to replay data, see page 3-68.
(10)-1 Cursor Position
This function allows the cursor displayed during captured data replay to move to a specified location
The following settings can be made.
CHECKPOINT
• When Cursor Sync is set to OFF, the currently selected cursor will move. See page 3-6 for details on
how to select cursors.
• When Cursor Sync is set to ON, both cursors will move.
Items Settings 1 Settings 2 Selections available
Cursor Position Move to First Execute
Move to Center Execute
Move to Last Execute
Move to Selected Method Position, Time
Move to When Position is selected Relative time
When Time isselected Date, time
Cursor Sync Off, ON
Data Search CH Analog, Pulse (Logic), Alarm
CH: Analog CH CH1 to CH10
Mode H, L
Level set numeric value
CH: Pulse CH Pulse1 to Pulse4
Mode H, L
Level set numeric value
CH: Logic CH Logic1 to Logic4
Mode H, L
CH: Alarm CH AlaÇím1 to Alarm4
Mode Both, H, L
Next Search Execute
Prev. Search Execute
Statistical Calculation
Function Off, Average, Max, Min, Peak, RMS
Execute Execute
Setting items Description
Move to First Moves the cursor to the beginning of data.
Move to Last Moves the cursor to the end of data.
Move to Center Move the cursor to the center of data.
Move to Selected Specifies the cursor position to be moved to.
Position Moves the cursor by specifying relative time.
Time Moves the cursor by specifying date and time.
Cursor Sync Allows synchronization of two cursors when moved.
Cursor A is always the fulcrum.
Off Moves the specified cursor (only one).
On Moves two cursor in sync.
To Next Page
Loading...