Page 10 of 48 S1047.mz-16-V1.0-EN
charge, this may indicate a defect in that cell. Do not use the battery pack
a
ny longer!
t T
he batteries may not be modified. Do not directly solder or weld the
c
ells.
ͻ
If handled improperly, there is a danger of fire, explosion, irritation and
b
urns.
S
pecial instructions
ͻ To charge and discharge baƩeries, only use speciĮcally designed
chargers/dischargers with balancer connectors.
S
afety notes for storing batteries
ͻ BaƩeries may only be stored in dry rooms with an ambient temperature
of +5°C to +25°C / 41 – 77 °F.
ͻ If the LiPo baƩery must be stored for a longer period, the voltage per
cell should be about 3.8V. If the cell voltage drops below 3 V, they must
be recharged immediately. Deep discharge will negaƟǀely inŇƵence the
performance and lifespan of the baƩery and rendering it defecƟǀe aŌer
a short amount of Ɵme.
To Next Page
Loading...
Need help?
General
