Page 9 of 48 S1047.mz-16-V1.0-EN
For Safety! Handling
the baƩĞry
t N
ever program your transmitter while normally using the model. This
c
an result in both inattention when controlling and incorrect
p
rogramming.
C
AUTION
A
void any kind of short-circuit in all sockets of the transmitter and of the
r
eceiver! Risk of fire! Use only suitable connectors. In no case the electronic
c
omponent of the transmitter or of the receiver may be changed or modified.
A
ny interference will void the warranty.
N
ote
During transport, protect the model and the transmiƩer from damages.
C
AUTION
ͻ
Protect all equipment from dust, dirt, moisture. Only use in dry locations.
ͻ
Do not use any damaged battery.
ͻ
Any alterations to the battery can cause serious injury or burns.
ͻ
Batteries may not be heated, burned, short-circuited or charged with
e
xcessive current or with reversed polarity.
ͻ
Combustible or highly flammable objects are to be kept away from the
c
harging area.
ͻ
Never leave the charger unattended when it is connected to the power
s
upply.
ͻ
Please charge your batteries only in rooms fitted with a smoke detector.
ͻ
Always charge the battery with a suitable charger.
ͻ
The maximum quick charging current specified for the respective cell
t
ype may not be exceeded.
ͻ If the battery heats up above 60°C / 140°F while it is being charged, stop
c
harging and let the battery cool down to approximately 30 - 40°C / 86 –
1
04 °F
ͻ
Never charge batteries that have already been charged or hot ones. If a
c
ell in a battery pack has become particularly hot following a quick-
To Next Page
Loading...
