Graupner mz-32 Help Reference Manual
Page 4 of 42 Help-Ref-EN-V1.0
MAIN SCREEN WIDGETS
The mz-32 home screen is designed around Widgets.
There are a total of 6 decks that can be designed with
widgets. Each widget fits inside a 1, 2, or 4
presentation block. Navigation between the decks is
done by using the arrow keys (2 upper keys left of
screen) or you can assign your own navigation keys
in the System menu.
You can delete all Widgets or clear the Widget Data
for each deck by pressing the reset icon. (Circle with
an arrow next to Help icon in the upper right corner of
the screen).
You can restore the default decks by selecting
System, then System Set, and tapping on the field of Model Preset – Widget.
A deck can be global for all models or specific to a model.
You can have a different set of decks for each of your models.
To access the Widget editor, touch and briefly hold on the field you would like to place a
Widget. The Widget editor will open with available widgets to choose from.
In case you placed a Widget at the wrong place or want to change it, touch and briefly hold
on the Widget to change or delete it.
Telemetry Widgets are active Widgets that receive real-time information from the radio
system.
For example, if your receiver voltage drops below a certain value the Widget will change its
color and alert you with a voice notification.
When you touch and hold on the widget a dialog open showing how many warnings were
issued, what the current voltage is as well as the minimal and maximal voltage recorded.
This works the same for all telemetry widgets.
Taping the clear field resets all values.
W01S1
To Next Page
Loading...
Need help?
General
