GRAUPNER mz-32 HoTT Reference Manual

Graupner mz-32 Help Reference Manual
Page 6 of 42 Help-Ref-EN-V1.0
is increased. A selection of Front causes the throttle channel to decrease as the throttle
control is increased.
Tap on the stick mode to change your stick mode configuration.
When done tap on the Create & Apply button, which will create the model and reinitialize
the radio to load the new model.
You can make later changes to the model configuration from the Model Type menu.
B01S3
MODEL TYPE
In the Model Type menu, you can change the existing
model configuration or rename the model.
Rename Model
Tap on the model name to bring up the keypad where
you can enter your new model name. When finished,
tap on return key which brings you back to the model
type selection menu.
Change Model Type
Tap on the Model Type icon to select your model type.
Each model type will have different selection options.
All Models
Tap on Throttle Minimum to change the throttle direction. A selection of None (only
available for Airplanes) is for models without a motor, such as a sailplane. A selection of
Rear causes the throttle channel to increase as the throttle control is increased. A selection
of Front causes the throttle channel to decrease as the throttle control is increased.
Tap on the stick mode to change your stick mode configuration.
Airplanes
Tap on the Wing Type icon to select your airplane’s wing type. If your wing type is delta
tap on the delta icon symbol to change the wing type selection.
Tap on the Tail Type icon to choose your tail type.
Tap on Engine to select how many engines your airplane has.
Brake Function controls the switching point for the brake control. Tap on the input field
(default throttle) to select the control for the brake channel. To set the offset value for
brake activation, move the control to the desired position and tap the offset field to store
the value.
Helicopters
Tap on Swash Type to select the number of swash plate servos and their geometry.
Tap on Linear Swash to set whether to compensate for the arc of the servos when changing
collective pitch. Set the value to Linear to enable the compensation or Normal to disable it.
Tap on Thro. Limit to enable (Limit) or disable (Unlimit) the channel 12 throttle limiter.
Selecting Unlimit will also free up channel 12 for other functions.
When finished tap on the Model Types icon to exit the menu.
B02S1

GRAUPNER mz-32 HoTT Specifications

General

Brand	GRAUPNER
Model	mz-32 HoTT
Category	Transmitter
Language	English