Description components18
Date of issue: October 2011
Automatic Greasing System OnePlus
EG1605R01
2.9.7 Combining outputs
The outputs of a distribution block can be combined by installing an external
interconnection line. The total grease output in that case is the sum of all outputs
thus interconnected.
The two outputs of a doser segment can be combined by removing the little
internal plug that seperates the two outputs and closing-off one of the ports. This
doubles the output of the port that remains open.
Figure 2.8 Combining outputs.
The values in the illustration represent the outputs of the ports in mm³ (0,001 cc)
per complete cycle of the distribution block. The amount supplied is determined by
the diameter of the piston.
1
1
3
3
4
To Next Page
Loading...
