Grundfos CRE Series Installation And Operating Instruction

9.4.2 Menu overview for Grundfos GO
Dashboard Single pump Multipump system
• •
View all metrics Single pump Multipump system
Pump and application
Actual controlled value • •
Acc. flow, specific energy • •
Energy consumption •
Energy consumption, system •
Power consumption •
Power consumption, system •
Motor bearing service •
Resulting setpoint •
Resulting system setpoint •
Motor speed •
Pump 1 •
Pump 2 •
Pump 3 •
Pump 4 •
Operating Log
Operating hours •
Operating hours, system •
Motor current •
Number of starts •
Inputs/outputs
Analog input 1 •
Analog input 2 •
Analog input 3
8)
•
Analog, Output
8)
•
Pt100/1000 input 1
8)
•
Pt100/1000 input 2
8)
•
Digital input 1 •
Digital input 2
8)
•
Digital input/output 3 •
Digital input/output 4
8)
•
Monitored metrics
Ambient temperature • •
Differential pressure • •
Differential pressure, inlet/outlet • •
Differential temperature, external • •
External pressure 1 • •
External pressure 2 • •
Feed tank pressure • •
Flow rate • •
Pressure : inlet • •
Pressure : outlet • •
Other parameter • •
Tank pressure, external • •
31
English (US)

Grundfos CRE Series Specifications

General

Motor Type	Asynchronous
Enclosure Class	IP55
Insulation Class	F
Series	CRE
Protection Class	IP55
Material	Stainless Steel
Applications	Water Supply, Pressure Boosting, Irrigation
Pumped liquid	Clean liquids
Approvals	CE
Voltage	380-415V
Connection Size	DN 32 to DN 100
Efficiency	IE3 Premium Efficiency
Power Supply	3-phase
Liquid Temperature Range	-10°C to +120°C
Temperature Range	-10°C to +120°C