Grundfos CRE Series Installation And Operating Instruction

4. Press OK to confirm No multi-pump function.
5. Press the Right button to continue.
6. Press OK to confirm.
10.54 Description of control mode
The function is only available in the HMI 300 and 301 operating
panels.
The function describes each of the control modes available for the
product.
10.55 Assisted fault advice
This function provides guidance and corrective actions in the event
of product failure.
58
English (US)

Grundfos CRE Series Specifications

General

Motor Type	Asynchronous
Enclosure Class	IP55
Insulation Class	F
Series	CRE
Protection Class	IP55
Material	Stainless Steel
Applications	Water Supply, Pressure Boosting, Irrigation
Pumped liquid	Clean liquids
Approvals	CE
Voltage	380-415V
Connection Size	DN 32 to DN 100
Efficiency	IE3 Premium Efficiency
Power Supply	3-phase
Liquid Temperature Range	-10°C to +120°C
Temperature Range	-10°C to +120°C