3.4 Identification
3.4.1 Identification of the pump model
Identify the pump by the nameplate on the pump. See description of
the nameplate and type key in the related installation and operating
instructions.
3.4.2 Identification of the motor model
Identify the motor by means of the nameplate on the terminal box.
Model K
Env.
PF:
Tam
DE:
NDE:
Wgt:
kg
Type:
MLE160B..284TSC-42-K EDAP
P.N.:
-V
TPUT
Variant
PB:
FM:
HMI:
CIM:
kW
rpm
%
98100448
IE5
IES2
Made in Hungary
DK-8850 Bjerringbro Denmark
TM084775
Motor
[HP]
3 × 440-480 V
2900-4000 rpm
20 •
25 •
30 •
3.4.3 Identification of the functional module
You can identify the fitted module in one of the following ways:
Grundfos GO
You can identify the functional module in the Fitted modules menu
under Status.
Motor display
For motors fitted with the HMI 300 or 301 operating panel, you can
identify the functional module in the Fitted modules menu under
Status.
Motor nameplate
You can identify the fitted module by means of the data on the
motor nameplate.
Env.Type:
PF:
CL:
IP:
INPUT
U in:
f in: Hz
OUTPUT
n: rpm
PDS Eff
XXX
V
:
%
Variant
PB:
FM:
HMI:
CIM:
Made in Hungary
I1/1: A
P2: kW
~ V
Tamb: C
DE:
NDE:
Wgt: kg
Type:
P.N.: -V
P.C.:
OUTPUT
rpm
XXXV
:
%
Variant
PB:
FM:
HMI:
CIM:
kW
TM082851
Model K
Functional module variants:
• FM310
• FM311
1)
1)
Without Bluetooth (BLE).
3.4.4
Identification of the operating panel
You can identify the operating panel in one of the following ways:
Grundfos GO
You can identify the operating panel in the Fitted modules menu
under Status.
Motor display
For motors fitted with the HMI 300 or 301 operating panel, you can
identify the operating panel in the Fitted modules menu under
Status.
Motor nameplate
You can identify the operating panel by means of the data on the
motor nameplate.
Env.Type:
PF:
CL:
IP:
INPUT
U in:
f in: Hz
OUTPUT
n: rpm
PDS Eff
XXXV
:
%
Variant
PB:
FM:
HMI:
CIM:
Made in Hungary
I1/1: A
P2: kW
~ V
Tamb: C
DE:
NDE:
Wgt: kg
Type:
P.N.: - V
P.C.:
OUTPUT
rpm
XXX
V
:
%
Variant
PB:
FM:
HMI:
CIM:
kW
TM082852
Model K
Operating panel variants
• HMI 200
• HMI 201
2)
• HMI 300
• HMI 301
2)
2)
For motors without a radio module.
3.5 Radio module
CAUTION
Radiation
Minor or moderate personal injury
‐ Locate the product at a minimum distance of 8 inches
(20 cm) from any body parts. Human tissue may be
heated by RF energy.
Installers and end users must be provided with these
installation and operating instructions and operating
conditions for satisfying RF exposure compliance.
The product incorporates a class 1 radio module for remote control.
You can use the module anywhere in the EU without restrictions.
For installation in the USA and Canada, see the appendix.
Via the built-in radio module, the product can communicate with
other MLE motors.
The product contains a class 1 radio. Grundfos will
support the product with security updates for at least 2
years from production of the unit.
3.6 Bluetooth
The product incorporates a Bluetooth (BLE) module for remote
control. You can use the module anywhere in the EU without
restrictions.
For installation in the USA and Canada, see the appendix.
Via the built-in Bluetooth module, the product can communicate
with Grundfos GO.
The product contains a Bluetooth (BLE) module. Grundfos
will support the product with security updates for at least 2
years from production of the unit.
Bluetooth information
Frequency of operation
2400 - 2483.5 MHz
Modulation type GFSK
Data rate 2 Mbps
Transmit power
5 dBm EIRP with internal
antenna
7
English (US)
To Next Page
Loading...
Need help?
General
