Grundfos CRE Series Installation And Operating Instruction

Settings Single pump Multipump system
Pipe-filling function • •
Pulse flow meter •
Ramps •
Standstill heating •
Stop at min. speed •
Communication
Bluetooth communication •
Radio communication •
GENIbus Number •
Connectivity and port settings •
General
Connection code •
Date and time
9)
•
Firmware •
Store settings •
Recall settings •
Unit configuration •
9)
Only available if an advanced functional module, type FM310 or FM311, is fitted.
Alarms and warnings
Single pump Multipump system
Alarm log • •
Warning log • •
Setup Single pump Multipump system
Assisted pump setup •
Assisted fault advice •
Application wizard •
Multi-pump setup • •
9.5 Grundfos GO Link
The product is designed for wired or wireless communication with
Grundfos GO Link.
Grundfos GO Link enables you to set functions and gives you
access to status overviews, configuration and current operating
parameters.
Use Grundfos GO Link together with these interfaces:
• Ethernet cable (Only FM310 and FM311)
• Grundfos MI 301 - USB - Wired/wireless (Only HMI 200 and
HMI 300)
• Grundfos PC Tool Link - USB - Wired
1
2
3
GENI - AYB
USB
USB
Ethernet
TM083379
Grundfos GO Link setup
33
English (US)

Grundfos CRE Series Specifications

General

Motor Type	Asynchronous
Enclosure Class	IP55
Insulation Class	F
Series	CRE
Protection Class	IP55
Material	Stainless Steel
Applications	Water Supply, Pressure Boosting, Irrigation
Pumped liquid	Clean liquids
Approvals	CE
Voltage	380-415V
Connection Size	DN 32 to DN 100
Efficiency	IE3 Premium Efficiency
Power Supply	3-phase
Liquid Temperature Range	-10°C to +120°C
Temperature Range	-10°C to +120°C