Assist Single pump Multipump system
Setup of multi-pump system • •
Description of control mode • •
Assisted fault advice • •
8.5 Grundfos GO
CAUTION
Radiation
Minor or moderate personal injury
‐ Locate the product at a minimum
distance of 20 cm from any body parts.
Human tissue may be heated by RF
energy.
Installers and end users must be provided
with these installation and operating
instructions and operating conditions for
satisfying RF exposure compliance.
The product is designed for wireless communication
with Grundfos GO using Bluetooth (BLE).
Grundfos GO enables you to set functions and gives
you access to status overviews, technical product
information and current operating parameters.
TM082930
8.5.1 Communication
When Grundfos GO initiates communication with the
product, the indicator light in the centre of Grundfos
Eye flashes green.
On products fitted with the HMI 100 or 200 operating
panel, you can enable communication by pressing the
Communication button.
On products fitted with the HMI 300 operating panel,
the display indicates that a wireless device is trying to
connect to the product. Press OK on the operating
panel to connect the product with Grundfos GO, or
press the Home button to reject connection.
Symbol Description
Press OK on the operating panel
to connect the product with
Grundfos GO.
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Press the Home button to reject
connection.
8.5.1.1 Bluetooth communication
Bluetooth communication can take place at distances
up to 10 m. The first time Grundfos GO
communicates with the product, you enable
communication by pressing the Communication
button or OK on the operating panel.
Later when communication takes place, the product is
recognised by Grundfos GO, and you can select the
product from the List menu.
41
English (GB)
To Next Page
Loading...
Need help?
General
