Grundfos CRE Series User Manual

8. Control functions
8.1 User interfaces
WARNING
Hot surface
Death or serious personal injury
‐ Touch only the buttons on the
operating panel. The product may be
very hot.
WARNING
Electric shock
Death or serious personal injury
‐ If the operating panel is cracked or
perforated, replace it immediately.
Contact the nearest Grundfos sales
company.
You can change the settings by means of the
following user interfaces:
• HMI 100 operating panel
• HMI 101 operating panel
5)
• HMI 200 operating panel
• HMI 201 operating panel
5)
• HMI 300 operating panel
• HMI 301 operating panel
5)
• Grundfos GO application.
5)
HMI without a radio module.
All settings are saved if the power supply is switched
off.
Related information
2.3.4 Identification of the operating panel
8.2 Operating panels, HMI 100 and 101
1
2
TM082922
Pos. Symbol Description
1 Grundfos Eye: The indicator light shows the operating status of the product.
2
Communication:
The button enables communication with Grundfos GO and other products of the same type.
31
English (GB)

Grundfos CRE Series Specifications

General

Motor Type	Asynchronous
Enclosure Class	IP55
Insulation Class	F
Series	CRE
Protection Class	IP55
Material	Stainless Steel
Applications	Water Supply, Pressure Boosting, Irrigation
Pumped liquid	Clean liquids
Approvals	CE
Voltage	380-415V
Connection Size	DN 32 to DN 100
Efficiency	IE3 Premium Efficiency
Power Supply	3-phase
Liquid Temperature Range	-10°C to +120°C
Temperature Range	-10°C to +120°C