Grundfos CRE Series User Manual

10. If the module is supplied with an FCC label, fix the
label on the terminal box.
FCC
TM082870
Model K
11. Fit the terminal cover and cross-tighten the four
screws to 5 Nm.
Make sure that the terminal box cover
is aligned with the orientation of the
operating panel.
7. Starting up the product
WARNING
Rotating parts
Death or serious personal injury
‐ Make sure to install the coupling
guards before powering on the
product.
WARNING
Corrosive liquids
Death or serious personal injury
‐ Wear personal protective equipment.
WARNING
Toxic liquids
Death or serious personal injury
‐ Wear personal protective equipment.
CAUTION
Cold surface
Minor or moderate personal injury
‐ Make sure that no one can accidentally
come into contact with cold surfaces.
Wear protective gloves.
CAUTION
Hot surface
Minor or moderate personal injury
‐ Do not touch the product while it is
running.
Follow the startup instructions for the
pump. See the related installation and
operating instructions for the pump.
Related information
1.1 Related instructions
30
English (GB)

Grundfos CRE Series Specifications

General

Motor Type	Asynchronous
Enclosure Class	IP55
Insulation Class	F
Series	CRE
Protection Class	IP55
Material	Stainless Steel
Applications	Water Supply, Pressure Boosting, Irrigation
Pumped liquid	Clean liquids
Approvals	CE
Voltage	380-415V
Connection Size	DN 32 to DN 100
Efficiency	IE3 Premium Efficiency
Power Supply	3-phase
Liquid Temperature Range	-10°C to +120°C
Temperature Range	-10°C to +120°C