Ecoflex
®
Connection Vault
Submittal Information
Revision A: August 24, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material:
Body: Rotationally-molded Polyethylene
Body Interior: Polyethylene Insulation
Cover: Polyethylene
Cover Fasteners: Stainless Steel
Cover Gasket: EPDM Rubber
Product Information and Application Use
The Ecoflex
®
Connection Vault provides a fully watertight,
insulated enclosure for multiple straight-through and branch
underground connections. This product is designed to
eliminate the need for multiple branch connections, saving
installation time and cost. Step-down outlets are compatible
with the majority of Ecoflex piping. Note: End Caps are
required at all ends of the piping system to ensure insulation
integrity.
9
Description Part
Number
Access
Cover (D
1
)
Height:
Overall (H
1
)
Height: Top to
Centerline (H
2
)
Height: Top to
Centerline (H
3
)
Width
(W
1
W
2
)
Length
(L
1
)
Weight
Ecoflex Connection Vault, 6 outlet 1018326 30" 29" 19" 11" 52" (W
1
)
66" 108 lbs.
Ecoflex Connection Vault, 8 outlet 1018327 30" 29" 19" 11" 65" (W
2
)
66" 112 lbs
Installation
The Connection Vault is designed for burial. Position the Connection Vault in the trench to achieve proper pipe alignment prior to inserting the piping.
For complete instructions, refer to the Pre-insulated Pipe System Connection Vault Instruction Sheet.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: (800) 321-4739
Fax: (952) 891-2008
www.uponor.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: (888) 994-7726
Fax: (800) 638-9517
www.uponor.ca
Jackson National Life phase 3.1
To Next Page
Loading...
