Grundfos TPE Series - Advanced Control Panel

English (GB)
16
11. Advanced control panel
Fig. 20 Advanced control panel
Pump variant
Fitted as
standard
Option
TPE, TPED - ●
NBE, NBGE, NKE,
NKGE & TPE, TPED,
NBE, NKE Series 2000
● -
TM05 4849 1013
Pos. Symbol Description
1
Grundfos Eye
Shows the operating status of
the pump.
For further information, see
section 17. Grundfos Eye.
2 - Graphical colour display.
3 Goes one step back.
4
Navigates between main
menus, displays and digits.
When you change the menu, the
display always shows the top
display of the new menu.
Navigates between submenus.
Changes value settings.
Note: If you have disabled the
possibility to make settings with
the Enable/disable settings
function, then you can enable it
again temporarily by pressing
these buttons simultaneously for
at least 5 seconds. See section
13.28 "Buttons on product"
(Enable/disable settings).
1
2
3
4
5
6
4
Saves changed values, resets
alarms and expands the value
field.
Enables radio communication
with Grundfos GO and other
products of the same type.
When you try to establish radio
communication between the
pump and Grundfos GO or
another pump, the green
indicator light in Grundfos Eye
flashes. A note also appears in
the pump display stating that a
wireless device wants to
connect to the pump. Press
on the pump control panel to
allow radio communication with
Grundfos GO and other
products of the same type.
5
Makes the pump ready for
operation and starts, and stops
the pump.
Start:
If you press the button when the
pump is stopped, the pump only
starts if no other functions with
higher priority have been
enabled. See section 16. Priority
of settings.
Stop:
If you press the button when the
pump is running, the pump is
always stopped. When you stop
the pump via this button, the
icon appears in the bottom of
the display.
6 Goes to the Home menu.
Pos. Symbol Description