Grundfos TPE Series - Symbols Used in This Document

English (GB)
3
1. Symbols used in this document
23. Servicing the product
63
23.1 Motor
63
23.2 Pump
63
24. Cleaning the product
63
25. Megging
63
26. Technical data, single-phase motors
63
26.1 Supply voltage
63
26.2 Leakage current
63
27. Technical data, three-phase motors
64
27.1 Supply voltage
64
27.2 Leakage current, AC
64
28. Inputs and outputs
65
29. Other technical data
66
29.1 Torques
67
29.2 Sound pressure level
68
30. Factory settings
69
31. Disposing of the product
70
Read this document before installing the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.
DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
personal injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which, if
not avoided, could result in minor or
moderate personal injury.
Tips and advice that make the work easier.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be taken
or must be stopped.