Grundfos TPE Series - Unit Configuration (Units); Buttons on Product (Enable;Disable Settings); Delete History; Define Home Display

English (GB)
46
13.27 "Unit configuration" (Units)
In this menu you can select between SI and US
units. The setting can be made generally for all
parameters or customised for each parameter.
Factory setting
See section 30. Factory settings.
13.28 "Buttons on product"
(Enable/disable settings)
In this display, you can disable the possibility of
making settings.
Grundfos GO
If you set the buttons to "Not active", the buttons on
the standard control panel are disabled. If you set
the buttons to "Not active" on pumps with an
advanced control panel, see below.
Advanced control panel
If you have disabled the settings, you can still use
the buttons to navigate through the menus but you
cannot make changes in the Settings menu.
When you have disabled the possibility to make
settings, the symbol appears in the display.
To unlock the pump and allow settings, press and
simultaneously for at least 5 seconds.
Standard control panel
The button always remains active but you can
only unlock all other buttons on the pump with
Grundfos GO.
Factory setting
See section 30. Factory settings.
13.29 Delete history
In this menu, you can delete the following historic
data:
• "Delete operating log".
• "Delete heat energy data".
• "Delete energy consumption".
13.30 Define Home display
This menu is only available in the advanced control
panel.
In this menu, you can set the Home display to show
up to four user-set parameters.
13.31 Display settings
This menu is only available in the advanced control
panel.
In this menu you can adjust the display brightness
and set whether or not the display is to turn off if no
buttons have been activated for a period of time.
13.32 "Store settings" (Store actual
settings)
Grundfos GO
In this menu, you can store the actual settings for
later use in the same pump or in other pumps of the
same type.
Advanced control panel
In this menu, you can store the actual settings for
later use in the same pump.
Pump variant "Unit configuration"
TPE, TPED, NBE,
NBGE, NKE, NKGE
●
TPE, TPED, NBE, NKE
Series 2000
●
Pump variant "Buttons on product"
TPE, TPED, NBE,
NBGE, NKE, NKGE
●
TPE, TPED, NBE, NKE
Series 2000
●
Pump variant Delete history
TPE, TPED, NBE,
NBGE, NKE, NKGE
-
TPE, TPED, NBE, NKE
Series 2000
-
Pump variant Define Home display
TPE, TPED -
NBE, NBGE, NKE,
NKGE & TPE, TPED,
NBE, NKE Series 2000
●
Pump variant Display settings
TPE, TPED -
NBE, NBGE, NKE,
NKGE & TPE, TPED,
NBE, NKE Series 2000
●
Pump variant "Store settings"
TPE, TPED, NBE,
NBGE, NKE, NKGE
●
TPE, TPED, NBE, NKE
Series 2000
●