English (GB)
5
5. Receiving the product
5.1 Transporting the product
5.2 Inspecting the product
Before you install the product, do the following:
• Check that the product is as ordered.
• Check that no visible parts have been damaged.
If parts are damaged or missing, contact your local
Grundfos sales company.
6. Mechanical installation
6.1 Handling the product
Observe local regulations setting limits for manual
lifting or handling. The motor weight is stated on the
nameplate.
6.2 Mounting the product
Secure the pump to a solid foundation by bolts
through the holes in the flange or the base plate.
6.3 Cable entries
See the size of the cable entries in section 29. Other
technical data.
6.4 Ensuring motor cooling
Leave at least 50 mm between the end of the fan
cover and a wall or other fixed objects. See fig. 1.
Fig. 1 Minimum distance, D, from the motor to
a wall or other fixed objects
WARNING
Falling objects
Death or serious personal injury
- Secure the product during
transportation to prevent it from tilting or
falling down.
CAUTION
Crushing of feet
Minor or moderate personal injury
- Wear safety shoes when moving the
product.
CAUTION
Back injury
Minor or moderate personal injury
- Use lifting equipment.
CAUTION
Crushing of feet
Minor or moderate personal injury
- Wear safety shoes and attach lifting
equipment to the motor eyebolts when
handling the product.
Do not lift the product by the terminal box.
CAUTION
Crushing of feet
Minor or moderate personal injury
- Secure the product to a solid foundation
by bolts through the holes in the flange
or the base plate.
In order to maintain the UL mark,
additional requirements apply to the
equipment. See page 71.
TM05 5236 3512
To Next Page
Loading...
