GSD Compuprint 9065 - Loading Paper Using the Front2 Push Tractor

User Manual 9065/9065plus

MAN10772-00 117
Loading Paper Using the Front2 Push Tractor (option)
1. To select the Front2 push tractor paper path press the
PATH key until the display shows:
LOAD FRONT2
 If you have been using a different path, the display shows:
PATH CHANGING
 If you have been using fanfold paper in the Front1 push tractor paper path, the printer automatically
 starts the parking procedure. The display shows alternately.
TEAR IF NECESS. and PARK PAPER
 Tear off the fanfold loaded with the Front1 push tractor (if it is longer than 18 inches) and press the
PARK key. The display shows:
PARKING
followed by
LOAD FRONT2
2. Open the Push trac
t
ors cover
t
urning it upwards and
la
y
it on the top of the printer
3. Unlock the Front2 push tractor sprockets
movin
g
the sprocket levers up

Note: in some version the sprocket levers work in opposite way instead of the same way as
the indicated in the figures