User Manual 9065/9065plus
MAN10772-00 65
Resetting to Factory Default Values
With the BACK TO MFG function it is possible to reset all items in the Power On Configuration Setupand in the Program
Setup to their factory default values. This may be useful if you do not remember the values you set in the setups, or
because you simply changed you mind about the settings you have just done. The default values for the setup items are
indicated in bold.
FUNCTIONS
↑
BACK TO MFG: NO
→
or
←
BACK TO MFG: YES
↓
or
PROG
PRINT OUT ?
If you want to select BACK TO MFG: YES, you have to exit from this item using the ↑ or the ↓ key, in order to confirm the
selection of this value.
At this point, the Power On Configuration Setup procedure is finished. If you exit pressing the ↓ and the
PROGRAM
key,
the new settings will be saved.
Do not power off the printer before all data have been written into the NVM and the printer has returned online.
To Next Page
Loading...