User Manual 9065/9065plus
MAN10772-00 56
Init Host Name
DEF. GATEWAY ID 000.000.000.000
↑
INIT HOST NAME ……………
→
or
←
PROGRAM key
↓
INIT WORKGROUP CMP_GROUP
The host is identified by a name. This function allows to create the name of the init host using a 14- character string.
Use the
←
or
→
keys to increase or decrease the values in one field and the ↓ or ↑ keys to move to the next field
(↓ to move to the right and ↑ to move to the left). Press the
PROGRAM
key to save the selected init host name. The
default name is
CMP_xxxxxx
.
Init Workgroup Name
INIT HOST NAME CMP_xxxxxx
↑
INIT WORKGROUP ……………
→
or
←
PROGRAM key
↓
SMTP ENABL. NO
The workgroup is identified by a name. This function allows to create the name of the workgroup using a 14-character
string. Use the
←
or
→
keys to increase or decrease the values in one field and
the ↓ or ↑ keys to move to the next
field (↓ to move to the right and ↑ to move to the left). Press the
PROGRAM
key to save the selected init workgroup name.
The default name is
workgroup
.
Enable/Disable the SMTP Service
INIT WORKGROUP workgroup
↑
SMTP ENABL. NO
→
or SMTP ENABL. YES
↓
↓
LPR ENABL.
MAIL SERV.ADDRES 000.000.000.000
SMTP
ENABL.
NO
Disables the SMTP (Simple Mail Transfer Protocol) service, that is disables the
reception/transfer/error service of the e-mail.
SMTP
ENABL.
YES
Enables the SMTP (Simple Mail Transfer Protocol) service, that is enables the
reception/transfer/error service of the e-mail.
To Next Page
Loading...