User Manual 9065/9065plus
MAN10772-00 73
Form Feed (FF) Command
TOP OF FORM 0
↑
IGNORE F.F. NO
→
or
←
IGNORE F.F. YES
→
or
←
↓
SKIPOVER 0
IGNORE F.F. NO
The Form Feed (FF) command is always executed.
IGNORE F.F. YES The Form Feed (FF) command is ignored when the paper is in the top of form (TOF) position.
A Form Feed can be performed if the LOAD/FF key is pressed.
Skip Over Perforation
IGNORE F.F. NO
↑
SKIPOVER 0
→
or
←
SKIPOVER …
→
or
←
SKIPOVER xxx
→
or
←
↓
DRAFT MODE NORM
These items set the skipover perforation. The values range between 0 and the page length - 1.
Draft Print Mode Selection
SKIPOVER 0
↑
DRAFT MODE NORM
→
or
←
DRAFT MODE BEST
→
or
←
DRAFT MODE HS
→
or
←
↓
QUALITY LQ
DRAFT MODE NORM The printer performs the draft printing at normal speed.
DRAFT MODE BEST The printer performs the draft printing at low speed to obtain better quality printing.
DRAFT MODE HS The printer performs the draft printing at high speed.
To Next Page
Loading...