User Manual 9065/9065plus
MAN10772-00 84
Reset Enable
NATION USA
↑
RIS ENABLE YES
→
or
←
RIS ENABLE NO
→
or
←
↓
RIS ENABLE YES
If the printer receives a command (ESC c) from the host to reset the printer, then the printer will (YES) or will not
(NO) reset the current configuration to the power-up configuration.
SI/SO Control
RIS ENABLE YES
↑
SI/SO CTL YES
→
or
←
SI/SO CTL NO
→
or
←
↓
AUTO CR YES
If the printer receives a command (SI or SO) from the host to enable or disable the special modes (oversize,
expanded and bar code modes), then the printer will (YES) or will not (NO) respond to the <SI> and <SO>
commands based upon your selection.
Auto Carriage Return
SI/SO CTL YES
↑
AUTO CR YES
→
or
←
AUTO CR NO
→
or
←
↓
PRIME ON DEL YES
If the printer receives a command (LF) from the host to perform a line feed then the printer will (YES) or will not
(NO) append a carriage return based upon your selection.
Prime on Delete
AUTO CR YES
↑
PRIME ON DEL YES
→
or
←
PRIME ON DEL NO
→
or
←
↓
CONTRL IN DG YES
If the printer receives a command (DEL) from the host, then the printer will (YES) or will not (NO) perform a prime
(reset) based upon your selection.
To Next Page
Loading...