GSE 675 - Advanced Setup Menu Guide

24 Model 675 User Instructions
2.2.8 Advanced Setup Menu
The advanced menu will allow access to the time/date, setup mode and application
files. Use the arrow keys to navigate to the desired tab. This is common on the
preprogrammed methods of counting such as Quick Count and APW.
Time/Date
1. From the time/date tab, press [ENTER] to access the configuration screen. The
time can be changed with the [F1] key. The date can be changed with the [F2]
key.
2. Key in the time or date by following the format on the display and press
[ENTER] to accept the entry.
3. Press [F5] (EXIT) to return to the main menu.
Setup (Setup Mode Access)
This tab allows access to the setup mode to make changes to parameters such as full
scale, count accuracy and baud rate etc. Please refer to the Model 675 Service Manual
for details on more advanced setups and configurations.
Apps (Application Menu)
Access the Application Menu to switch to another operating mode or the factory default
mode.
1. From the Apps tab press [ENTER].
2. Key in the access code and press [ENTER]. The Apps Menu will automatically
load.
NOTE: Press [F5] at any time to abort loading the Apps Menu.
Scanner
This tab was specifically designed to show the string received from a scanner. Scan a
label and the raw scanner data will be shown on the display.
F1 F2 F3 F4 F5