20 Model 675 User Instructions
2.2.3 Setup
This menu was designed for accessing the items that will need to be changed most
often. Below is an explanation of the choices in the menu. Follow the instructions on
the display for each key. The cell shaded in gray has a multiple level menu.
NOTE: The YES key is [ENTER] the NO key is [CLR].
2.2.4 Setup Menus
This is the next level of menus, which offer more advanced setup. The cells shaded in
gray have a multiple level menu.
2.2.5 Cal
Refer to Chapter 4 for complete instructions on calibrating the Model 675.
2.2.6 Display Style
Different display styles are offered to help customize the Model 675 parts counter to fit
your needs. Choose one of the display types and press [F5] (EXIT) to save the change
and return to the main menu. By using the [SELECT] key several modes can be viewed
from the Application Menu screen. See the section on Set Modes on page 22.
Function Key Parameter Description Default Setting Keypress
CHANGE
SAMPLE
Change the default sample
size
10 Key in new sample size and press
Enter to accept or [F5] to escape
DELETE PART # Delete specified part number Will not show until a part
number is established
Key in part # and press [F3]. Press
[F5] to enter the setup. Press [F2]
to delete part #.
KEY-IN APW Key in an average piece
weight for sample
0 Key in new average piece weight
and press [Enter] or [F5] to escape
SETUP MENUS Continues on to the Setup
Menus
Not applicable Press [F4] to continue
Function Key Parameter Description Default Setting Keypress
CAL Calibration any of the enabled
scales
Not applicable Key in access code and press [Enter]
or press [F5] to escape
DISPLAY STYLE Chose how the display will
appear
Style 2 Press either [F1] - [F3] to chose the
desired display style or [F5] to escape
PRINT MENU Choose what information to
print out
Not applicable Continues on to the Print Menu
selections
ADVANCE
SETUP
Continues on to the Advanced
Setup Menu
Not applicable See page 24
To Next Page
Loading...
