42 Model 675 User Instructions
5.5 Miscellaneous Errors
CoDE71
TxNot
Exist
The specified custom transmit does not exist.
CoDE95
SyErr
HSR00
An error occurred at startup or during operation. Contact GSE.
CoDE95
SyErr
Typ04
An error occurred at startup. Contact GSE.
Okay?
#####
This is not an error. Press to acknowledge your entry, or [ENTER] to re-enter.
Cksum
error
Upon each power-up, the Model 675 tests the integrity of its firmware. If the result is
not correct this message is displayed and the scale is not usable.
Message Description
Entry
Error
An invalid entry was made. When entering data, make sure the values are within
the acceptable limits and of the proper type as required by the entry mode.
Which
Tx#?
This prompt will appear when the 675 is setup with more than one custom transmit
is set for "Prmpt" (Prompt) and the [PRINT] key is pressed. The "WhichTx#?"
message is asking for a custom transmit number to be entered. Key in the custom
transmit desired and then press [ENTER]. For example, [2] [ENTER], for custom
transmit number 2.
OVER-
WRITE
The oldest row in the DSD database has been overwritten with a new row of data.
Rows:<
XXX
The number of DSD data rows has exceeded the warning threshold. Print and/or
download the DSD database to prevent loss of data before the maximum number of
DSD data rows is exceeded.
Fram2
Small
There is not enough FRAM installed to accommodate the current request.
Message Description
To Next Page
Loading...
