Model 675 User Instructions 27
3 Operation
This chapter will give detailed operating instructions on each preprogrammed mode.
The Model 675 is designed to operate from the 5 soft keys or the dedicated keys of the
keypad. The advantage of using the soft keys is they are placed in succession for easy
operation.
Bypass the GSE splash screen on power up by pressing the [ENTER] key when the
splash screen appears.
3.1 Quick Count
This section provides explanation on how to use the Quick Count Method. Refer to
page 13 for instructions on setting the Model 675 up for Quick Count.
3.1.1 Sample and Count
Follow the steps below obtain an average piece weight (Sample) and count parts
(Count).
Auto Tare Method
Sampling Pieces
1. If a container is used:
1a. Place an empty container on scale and press the [F1] Sample or [SAMPLE]
key. The scale will automatically tare the container.
- or -
2. If a container is not used:
Sample Press [F1] to sample pieces. See the instructions below for more details on counting and
sampling. The default sample size is used unless a new sample size is keyed in.
Count Press [F2] to access the quantity mode. This key is primarily used for continuing to
count pieces using the current average piece weight.
Accum Accumulate - Maintains a total of quantity accumulations. Press [F3] to add the current
quantity to the total.
Print Press [F4] to print a ticket or send a transmit to a computer.
Setup Access setup menus, see page 15 for further details.
To Next Page
Loading...
