Model 675 User Instructions 29
3.1.2 Accumulate
1. Press [F3] to accumulate (add) the current quantity to the total quantity. Press
[F4] to print to a computer, printer or another peripheral device.
2. After accumulating, the weight must return to zero before another
accumulation will be added. The display will show CLEAR WGHT! if the weight
is not within the zero threshold. Remove weight and try again. This feature is
necessary to avoid double accumulations.
3.2 APW Lookup
Follow the steps below to perform a sample and count parts. Also the ability exists to
store part numbers, lot numbers, bin numbers and average piece weight (APW).
3.2.1 Sample and Count
Follow the steps below obtain an average piece weight (Sample) and count parts
(Count).
Auto Tare Method
Sampling Pieces:
1. If a container is used:
1a. Place container on scale and press the [F1] Sample or [SAMPLE] key. The
scale will automatically tare the container.
- or -
2. If a container is not used:
2a. Press the [F1] Sample or [SAMPLE] key without the sample pieces on the
scale. The scale will tare to establish a net zero reference.
Sample Uses default sample size and prompts user to add that many pieces.
Store Store a part number with average piece weight and description.
Rec/New Add a new part number or recall a part number from the database.
Entry This only appears when a part number is entered. Scan in or key in the part number
and press [F3]. Press [F4] to access the Description, Lot #, Bin # and APW fields.
Setup Access setup menus, see page 20 for further details.
0 000
.
Add
10
To Next Page
Loading...
