Model 675 User Instructions 31
Update a Part Number
It is possible to update the data that is stored with a part number.
1. While viewing the part number and data press [F2] (Store). The data will be
updated in the database.
Recall a Part Number
A part number that was stored previously can be recalled to count parts without having
to sample the part.
1. Key in the part number to recall and press [F3] (Rec/New). If any other fields
were entered they will appear as well.
2. Place pieces on the platform to count.
Delete a Part Number
Any part number that is stored may be deleted.
1. Recall the part number to be deleted by keying in the part number and pressing
[F3] (Rec/New). The part number does not have to be recalled if it is already
being viewed.
2. Press [F5] (Setup).
3. Press [F2] (Delete Part#). You will be prompted with the part number to be
deleted and the choice of deleting the part number or aborting the process.
This key will not appear if a part number has not been recalled.
4. Press [CLR] to cancel and return to the APW Lookup screen or [ENTER] to
continue deleting the part number.
3.2.2 Accumulate
1. Press [F3] to accumulate the current quantity to the total quantity. Press [F4] to
print to a computer, printer or another peripheral device.
1a. After accumulating, the weight must return to zero before another
accumulation will be added. The display will show CLEAR WGHT! if the weight
is not within the zero threshold. Remove weight and try again. This feature is
necessary to avoid double accumulations.
3.3 GSE Default
3.3.1 Simple Keypad Sample
Auto Tare Method
Sampling Pieces:
1. If a container is used - Place container on scale and press the [SAMPLE] key.
The scale will automatically tare the container.
To Next Page
Loading...
