32 Model 675 User Instructions
- or -
1a. If a container is not used - Press the [SAMPLE] key without the sample pieces
on the scale. The scale will tare to establish a net zero reference.
2. Add the sample pieces and press the [ENTER] key to accept the sample.
3. Continue to add pieces to count.
Without Auto Tare
1. If the sample size is known and a container is used:
1a. Place an empty container on the scale and press [TARE] key.
1b. Place the sample in the container.
1c. Key in the sample size and then press the [SAMPLE] key. The scale will
accept the current weights as a sample and will display the quantity.
-or-
2. If the sample size is known and no container is used:
2a. Place the sample on the scale.
2b. Key in the sample size and then press the [SAMPLE] key. The scale will
accept the current weights as a sample and will display the quantity.
Figure 3.2 Example[5] [0] [SAMPLE]
0 000
.
Add
10
10
Qty
89
Qty
50
Qty
To Next Page
Loading...
