GST GST200 - Appendix 3 Operation Menu

GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Page 50
Appendix 3 Operation Menu
Menu
BROWSE To look through equipment
Active EQ Loop equipment
COM EQ Communication equipment, including repeater
panels and slave FACPs
Access ZCP
LOG To view history record
SCREEN To set screen menu
LCD Contrast To set LCD contrast
Browse Mode browsing Information
Zone Mode Zone display mode
Loop Mode Loop display mode
Browsing C&E To view C&E equation
PRINT To set printer menu [password required]
Disable Printing disabled
Only Fire Only printing fire information
All History When viewing history records, you can print the
information being viewed by pressing PRINT.
MUTE You can silence the alarm sound by pressing “MUTE”. If the
conditions for silencing the system is met (fire alarm silence delay
settings and correct operation password level), the system can
also be silenced.
VIEW FAULT Viewing fault information when in non-fault state.
SELF TEST Audible-visible self-test key. In normal monitoring state, you
can check all the audio-visible devices by pressing this key
(password required).
LOCK When keypad is in unlocked state, press this key to lock the keys.
△
＝
or
＝
▽
When there is more than one piece of information, you can scroll
the screen by pressing this key.
ESC Pressing this key cancels output or exits menu. In information
display state, you can return the system to the highest level.
VIEW DISABLE In non-disable state, press it to display the disabled
information.
MODE Setting gas extinguishing equipment (password required)
Disable Do not automatically link gas-extinguishing system
Enable Link gas extinguishing system automatically
SYSTEM Setting system menu (password required)
Time/Date Setting the system time