GST GST200 - Chapter 1 Product Introduction

GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Page 3
Chapter 1 Product Introduction
GST200 Intelligent Fire Alarm Control Panel (FACP) is designed by EN 54-2 standard
with qualities of simple installation, operation, and easy maintenance. It is used in fire
alarm system with the following features:
1 It controls at most 30 zones. Each zone has its own alarm and fault/disable LEDs
and a label.
2 Class A loop can have up to 235 addressable devices. It is compatible with a series
of addressable GST products, which are intelligent sounder strobe (I-9403)
complying with EN 54-3, photoelectric smoke detector (I-9102) complying with EN
54-7, rate of rise and fixed temperature heat detector (I-9103) complying with EN
54-5, intelligent manual call point (I-9202) complying with EN 54-11, intelligent
reflective beam detector (I-9105R) complying with EN 54-12, input and output
module (I-9300, I-9301) complying with GEI 1-084, and loop isolator (C-9503)
complying with GEI 1-052.
3 The LCD can display 8 lines in total and 18 characters each line, assisting the 15
LEDs to display important information.
4 The memory does not lose data even if power supply is accidentally removed.
5 It has manual keys for each zone, which can activate/silence the sounder strobes
separately.
6 Automatically prompting operation steps for every alarm device and for smoke
exhaust and fire extinguisher by field programming.
7 Sounder strobe interface provides 0.5A/24V output, compatible with GST
conventional sounder strobe (C-9403) designed according to EN 54-3.
8 RS232 interface enables communication with PC.
9 RS485 interface enables networking.