GW Instek ASR-2000 Series Programming Manual

REMOTE CONTROL
23
2. Press the Menu key. The Menu
setting will appear on the display.
3. Use the scroll wheel to go to item 4, USB
Device and press Enter.
4. Go to the Speed setting and set the USB speed.
Speed
Full(default), Auto
5. If the connection is successful Connection Status
will change from Offline to Online.
USB Device Configuration
Exit
6. Press Exit[F4] to exit from the rear
panel USB settings.

GW Instek ASR-2000 Series Specifications

General

Brand	GW Instek
Model	ASR-2000 Series
Category	Portable Generator
Language	English