ASR-2000 Programming Manual
24
USB Remote Control Function Check
Invoke a terminal application such as Realterm.
ASR-2000 will appear as a COM port on the PC.
To check the COM settings in Windows, see the
Device Manager. For example, in Win7 go to
the Control panel → System → Hardware tab.
If you are not familiar with using a terminal
application to send/receive remote commands via
a USB connection, please see page 28 for more
information.
Run this query command via the terminal after
the instrument has been configured for
USB remote control (page 22).
*IDN?
This should return the Manufacturer, Model
number, Serial number, and Software version
in the following format.
GWINSTEK, ASR-2XXX, GXXXXXXXX,
XX.XX.XX.XXXX-X
Manufacturer: GWINSTEK
Model number : ASR-2XXX
Serial number : GXXXXXXXX
Software version : XX.XX.XX.XXXX-X
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
To Next Page
Loading...
Need help?
General
