GW Instek ASR-2000 Series - Source Commands; [:Source]:Current:limit:peak:high

REMOTE CONTROL
77
Source Commands
[:SOURce]:CURRent:LIMit:PEAK:HIGH ........ 77
[:SOURce]:CURRent:LIMit:PEAK:LOW ......... 78
[:SOURce]:CURRent:LIMit:RMS[:AMPLitude] 78
[:SOURce]:CURRent:LIMit:PEAK:MODE....... 79
[:SOURce]:CURRent:LIMit:RMS:MODE ......... 79
[:SOURce]:FREQuency:LIMit:HIGH ............... 79
[:SOURce]:FREQuency:LIMit:LOW ................. 80
[:SOURce]:FREQuency[:IMMediate] ............... 80
[:SOURce]:FUNCtion[:SHAPe][:IMMediate] . 81
[:SOURce]:FUNCtion:THD:FORMat ............... 82
[:SOURce]:MODE ............................................... 82
[:SOURce]:PHASe:STARt:STATe ..................... 83
[:SOURce]:PHASe:STOP:STATe ....................... 83
[:SOURce]:PHASe:STARt[:IMMediate] ........... 84
[:SOURce]:PHASe:STOP[:IMMediate] ............ 84
[:SOURce]:READ ................................................ 85
[:SOURce]:VOLTage:RANGe ........................... 85
[:SOURce]:VOLTage:LIMit:RMS ...................... 86
[:SOURce]:VOLTage:LIMit:HIGH.................... 86
[:SOURce]:VOLTage:LIMit:LOW ..................... 87
[:SOURce]:VOLTage[:LEVel][:IMMediate]
[:AMPLitude] ...................................................... 87
[:SOURce]:VOLTage[:LEVel][:IMMediate]:OFFSet
............................................................................... 88
[:SOURce]:CURRent:LIMit:PEAK:HIGH
Set
Query
Description
Sets or queries the Ipk-High Limit parameter for
the continuous operation mode.
Syntax
[:SOURce]:CURRent:LIMit:PEAK:HIGH
{<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:CURRent:LIMit:PEAK:HIGH?
[MINimum|MAXimum]
Parameter
<NR2>
Ipk-High Limit in Arms.