GW Instek ASR-2000 Series - [:Source]:Simulation:repeat:count; [:Source]:Simulation:repeat:enable

REMOTE CONTROL
105
Query Syntax
[:SOURce]:SIMulation:NORMal 1:VOLTage?
[MINimum|MAXimum]
Parameter/Return
parameter
1
Normal 1
<NR2>
Voltage of the abnormal step.
MINimum
Minimum settable voltage
MAXimum
Maximum settable voltage
Example
:SIM:NORM1:VOLT MAX
Sets the normal1step voltage to the maximum.
[:SOURce]:SIMulation:REPeat:COUNt
Set
Query
Description
Sets or queries the repeat count for the Simulation
mode.
Syntax
[:SOURce]:SIMulation:REPeat:COUNt
{<NR1>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:REPeat:COUNt?
[MINimum|MAXimum]
Parameter/Return
parameter
<NR1>
0 ~ 9999 (0 = infinite loop)
MINimum
0
MAXimum
9999
Example
:SIM:REP:COUN 1
Sets the repeat count to 1.
[:SOURce]:SIMulation:REPeat:ENABle
Set
Query
Description
Turns the repeat function on or off for the
Simulation mode.
Syntax
[:SOURce]:SIMulation:REPeat:ENABle
{<bool>|OFF|ON}
Query Syntax
[:SOURce]:SIMulation:REPeat:ENABle?
Parameter/Return
parameter
OFF | 0
Disabled
ON | 1
Enabled
Example
:SIM:REP:ENAB 1
Enables the repeat function.