GW Instek ASR-2000 Series - [:Source]:Read; [:Source]:Voltage:range

REMOTE CONTROL
85
[:SOURce]:READ
Query
Description
Returns the measurement readouts.
Query Syntax
[:SOURce]:READ?
Return parameter
<Vrms>,<Vavg>,<
Vmax>,<Vmin>,<I
rms>,<Iavg>,<Im
ax>,<Imin>,<IpkH
>,<P>,<S>,<Q>,<
PF>,<CF>,<THDv
>,<THDi>,<Freq>
<THDv>,<THDi> returns values in
AC-INT mode only, whereas returns
Invalid in other modes.
<S>,<Q>,<PF>,<CF> returns Invalid
in DC-INT mode.
<Freq> returns values in AC+DC-
Sync and AC-Sync modes only,
whereas returns Invalid in other
modes.
Example
:READ?
>+0.3204,+0.0306,+0.1879,-0.5809,+0.0121, -0.0007,
+0.0030, -0.0060, -0.0201, +0.0013, +0.0039, +0.0037,
+0.3400, +1.1500, Invalid, Invalid, Invalid
[:SOURce]:VOLTage:RANGe
Set
Query
Description
Sets or queries the voltage range.
Syntax
[:SOURce]:VOLTage:RANGe
{<NR1>|100|200|AUTO}
Query Syntax
[:SOURce]:VOLTage:RANGe?
Parameter /
Return parameter
<NR1>
From 0 – 2, which represent different
voltage ranges, respectively.
100
100V
200
200V
AUTO
AUTO (Only AC+DC-INT or AC-INT
or DC-INT or AC+DC-sync or AC-sync
Active)
Example
:SOUR:VOLT:RANG?
200V
Returns the voltage range as 200V.