ASR-2000 Programming Manual
28
Using Realterm to Establish a Remote Connection
Realterm is a terminal program that can be
used to communicate with a device attached to
the serial port of a PC or via an emulated serial
port via USB.
The following instructions apply to version
2.0.0.70. Even though Realterm is used as an
example to establish a remote connection, any
terminal program can be used that has similar
functionality.
Realterm can be downloaded on Sourceforge.net
free of charge.
For more information please see
http://realterm.sourceforge.net/
1. Download Realterm and install according to
the instructions on the Realterm website.
2. Connect the ASR-2000 via USB (page 21) or via
RS-232 (page 24).
3. If using RS-232, make note of the configured
baud rate, stop bits and parity.
4. Go to the Windows device manager and find
the COM port number for the connection.
For example, go to the Start menu > Control
Panel > Device Manager.
Double click the Ports icon to reveal the
connected serial port devices and the COM port
for the each connected device.
To Next Page
Loading...
Need help?
General
